PLASMONT MULTIUSO

Use clean, uncontaminated water for dilution.

Apply with the tools indicated in the application system, clean, in perfect condition, and, of course, free of oxides.

Repaint once the indicated time has elapsed. Since this depends on humidity, temperature, and layer thickness, the lack of clogging of the sandpaper will indicate that the product is ready for further action.

New Surface:

-Cement / plaster mortar: Check the suitability of PLASMONT MULTIUSO STANDARD for the substrate.

-Wait until complete setting (minimum 30 days). -Clean the substrate of possible efflorescence and neutralize alkaline surfaces.

-On excessively polished surfaces, sand to open the pore.

-Clean the substrate of foreign substances and/or residues.

-Open possible cracks or fissures to a sound bottom, remove the dust produced with a brush or broom, and apply PLASMONT MULTIUSO STANDARD as indicated in the sections on Application Systems and Application.

-Never exceed the recommended maximum layer thicknesses.

-On excessively friable surfaces, before puttying, fix with the appropriate fixative (see family 6).

-Wood:

-Check the suitability of PLASMONT MULTIUSO STANDARD for the substrate.

-On excessively polished surfaces, sand to open the pore.

-Clean the substrate of foreign substances and/or residues.

-Open possible cracks or fissures to a sound bottom, remove the dust produced with a brush or broom, and apply PLASMONT MULTIUSO STANDARD as indicated in the sections on Application Systems and Application.

-Do not exceed the recommended maximum layer thicknesses.

-Apply to sound, well-degreased, resinous exudation-free, dust-free, dry woods with a moisture content of less than 20%.

If the wood shows signs of aging, it must be sanded beforehand and cracks opened to wood in good condition.

Restoration and Maintenance:

-Remove foreign substances poorly adhered or in poor condition from the substrate, open the pore if it is closed by sanding or another mechanical means. Check adhesion and treat as NEW SURFACES.