ESMALTE SECADO RAPIDO INDUSTRIAL

- The bases are dyed following the indications of the machine and Tintométrico System.
- ESMALTE SECADO RAPIDO INDUSTRIAL BLANCO-100 -  can be applied like finish paint.
- The end item is applied like that : To remove the product until its perfect homogenization. On clean and dry substrata, to eliminate the dirt by means of  detergents and clean water.

New wood:
1. The support must be free of strange products and/or remainders.
2. To apply on wood with an inferior humidity content to 20%.
3. To apply on healthy wood, taken out the greasel, without dust and droughts.
4. To sandpaper and to eliminate possible rest of tail in the assemblies and failures.
5. If the wood presents/displays aging signs must previously be sandpapered, be printed and eliminated the dust by means of brush or any other average mechanic.
6. In this case the suitable primer more is the Selladora Sellalux.

Iron and its derivatives:
1. In order to protect the support, previous to its decoration, to deal with suitable primer (family 6) following the specifications of data sheet.
2. For the decoration of the support, this one must be free of strange products and/or remainders, as well as taken out the grease , without dust and dry. If it presents/displays oxidation signs, the oxide must be eliminated by means of cepillado or any other average mechanic. Also the Oxifín is adapted (to see the data sheet).

Construction (plaster, cement and derivatives):
1. To deal with the habitual way these supports, being eliminated saltpeters, excesses of humidity and eflorescencias.
2. To eliminate strange products and/or remainders.
3. Once dry to print with Sellalux Primer.