MONTO PINTA AZULEJOS

- The tile must be free from foreign products and/or residues, well-cleaned, dust-free and dry. Wash with soap and water. Do not use silicone- or wax-based cleaning products.
- Clean tile joints with a brush and subsequently remove any remaining residues.
- Stir the product until perfectly blended.
- Apply according to the instructions set out in the attached application table.
- When applying the first coat dilute the product according to the porosity and state of the surface. Finish with one or more coats until full coverage is achieved. Apply the product in fine coats, spreading it appropriately until the surface is uniformly covered.
- Do not apply to floors or worktops. Do not apply to submerged areas.
- Do not apply the product when room temperature is under 5ºC or to surfaces exposed to strong sunlight.
- Ensure the area is well ventilated while the product is drying.
- Do not apply when relative moisture is over 80%.
- Store the paint in a place protected from the elements and low temperatures.
- Clean utensils with solvents immediately after use.
- Take certain precautions during the first days after the paint is applied. Do not wash or touch until at least seven days have elapsed.
- Polyurethane-based product, slightly yellows in the dark.
- Do not use abrasives or scourers which might scratch the enamel.
- Hardness, adhesion and ultimate resistance are obtained after 21 days.