Home / Products / Paving / / PAVICLOR

    • PAVICLOR

    Multi-purpose chlorinated-rubber paint, ideal for painting floors and metals, adding high chemical and mechanical resistance.
    Finish
    Semimate
    Performance
    3 - 8 m²/L
    Drying time
    5-15min
    Formats
    15L 4L
    I´m interested in this product

    Applications

    • Outdoors/Indoors
    • Iron
    • steel
    • Construction
    • The resistance and durability of the product for floor are proportional?s to the aggressiveness that could suffer

    How to apply?

    • Painting brush
    • Roller
    • Air-less gun
    • Air-mix gun
    • Aerographic gun
    • Low preasure turbo

    Colors

    White 102, 184 blue zone, 152 red and 128 green.
    Colors of the RAL letter group A, B and C

    TR.
    Tintable in tintometric.
    - Stir until perfectly blended. Dilute according to the prescribed conditions.
    - Apply to bases that are very dry, clean and free of any extraneous products.
    - On metal: a dry layer of film somewhere between 25 and 40 microns thick.
    - Do not apply the product at temperatures below 10º C.
    - Do not apply at high temperatures or to overheated surfaces.
    - Other recommended iron/steel priming: Minio Blanco, Impriepox M-10 or Impripol.
    - Check for any possible bleeding on asphalted surfaces and, if detected, dilute with chlorinated-rubber solvent 1403 or consult our Technical Department.
    - Humidity of flooring: maximum of 4% measured at a depth of 2 cm.
    FLOORS: It is essential to prepare it correctly.
    1. Wait until completely set (minimum 30 days). Remove any efflorescence.
    2. Paving must be prepared, clean, dry and, if necessary, screeded.
    3. Grease and oils must be completely removed.
    4. Grit-blasting or bush-hammering is the best solution, although a 15-20% caustic soda solution, followed by rinsing and neutralisation with hydrochloric acid will be sufficient in some cases . Suitably porous paving can also be achieved with bush-hammering or grit-blasting.
    5. In moderately porous floors, a simple chemical treatment with hydrochloric acid followed by rinsing with plenty of water may be sufficient.
    6. If in doubt, please consult our Technical Department before you apply a chemical treatment, as it is not always sufficient. Never apply to asphalt bases at high temperatures. Remove any extraneous products and ensure there is no plasticiser migration.

    METALS: The base must be free of extraneous products and/or residue. It must be properly primed beforehand, following the priming guidelines given.

    Downloads

    Technical specifications

    I´m interested in this product
    I´m interested in this product

    Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

    Readily available stock

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Perfect orders

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Warehouse management

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Fast loading

    8 loading docks for 24-ton trucks.

    Our own transport

    Flota propia de camiones de reparto preparados para transporte ADR.

    We are always close by

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    Liter calculator

    The number of hands depends on the surface to apply the product.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de PAVICLOR Semimate